-
- Wedge Anchor Bolt M12
- To obtain a reliable and huge tightening force, it is necessary to ensure that the clamp ring fixed on the gecko is fully expanded. And the expansion clamp must not fall off the rod or twist or deform in the hole.
Hebei Qianmu Fastener Manufacturing Co.,Ltd. [Verified]
More >> -
- Stamping Weld Parts
- Stamping weld partsZTHS040.01mm~0.1mmPower coating, Polishing, Plating, Brushing, sandblasting, anodizing,passivation,silk-print ect.
Zhejiang ZN Technology Co., Ltd. [Verified]
More >> -
- Oil Resistant NBR Rubber O-ring
- Name: Oil Resistance NBR Rubber O-ringMaterial Type: NBRHardness Range: 40-90 ShoreAColor: Black or other colors as you need
Xiamen Xiashun Seal Ind and Trade Co.,Ltd [Verified]
More >> -
- Brushless Electric Shaft
- Processing material: stainless steel iron 45# steel copper etc.Maximum diameter: can be customizedTolerance: can be customizedMachining type: MillingProcessing cycle: 8-15 days
Hechuan Intelligent Manufacturing Co., Limited [Verified]
More >> -
- Garnet Abrasive
- This Garnet Abrasive uses high quality iron aluminum alloy as raw material, mechanically processed and produced after water, magnetic and shielding. Garnet has self-sharpness, moderate hardness, good toughness, sharp edges, low loss and long service life.
Henan Hengxin Industrial & Mineral Products Co.,Ltd [Verified]
More >> -
- 6 Blades Large Industrial Ceiling Fan
- High Efficient Ventilation Industrial Ceiling FanPower 1.5kw imported motor, actual power consumption per hour 0.8 degrees, cost-effective energy consumption, good cooling and ventilation
Zhejiang Xianfeng Mechanical and Electrical Equipment Co., Ltd [Verified]
More >> -
- Stainless Steel Bolt
- 1. Standard :DIN 931/ DIN603/DIN6921 ASME B18.2.12. Grade :A2-70,A4-80, Stainless Steel: SS201, SS303, SS304, SS316,SS316L,SS904L3. Size : M4-M36, 5/16-1-3/4”4. Surface: Passivated
Jiaxing Shineworld Trading Co., Ltd. [Verified]
More >> -
- Wedge Anchor Bolt
- The calibrated tensile force values are all tested under the conditions of cement strength of 260 ~ 300 kgs/cm2, and the maximum value of the safety load must not exceed 25% of the calibrated value.
Hebei Qianmu Fastener Manufacturing Co.,Ltd. [Verified]
More >> -
- Electro Galvanized Clout Nail
- ● Type: Clout nails, Roofing Nail, felt nails● Finish: Electro Galvanized● Color: Sliver, Golden● Head Style: Flat
Doublemoon Hardware Company Ltd [Verified]
More >> -
- Hex Bolt, Full Thread/Partial Thread
- 1.Full thread-Standard: DIN558/DIN933/DIN961/2.Partial thread Standard: DIN601/DIN931/DIN960/ISO40173.Grade : 4.8 5.8 8.8 10.94.Size: M4-M36
Jiaxing Shineworld Trading Co., Ltd. [Verified]
More >> -
- 24 FT Big Ventilation Ceiling Fan
- The comfort brought by the super large energy-saving fan is incomparable to other fans.
Zhejiang Xianfeng Mechanical and Electrical Equipment Co., Ltd [Verified]
More >> -
- Stainless Steel Flange Bolt
- 1. Standard:DIN6921/ ASME B18.2.12. Grade :A2-70,A4-80, Stainless steel304 and 3163. Size : M4-M36, 5/16-1-3/4”4. Surface: Passivated
Jiaxing Shineworld Trading Co., Ltd. [Verified]
More >> -
- Hardware Stamping Parts
- Hardware stamping parts0.05mm~0.1mmStainless Steel, Aluminum, Copper, Brass, Galvanized Steel, Carbon Steel, Hot Roll Steel, Bronze Steel, Zinc Alloy, SPCC etc.
Zhejiang ZN Technology Co., Ltd. [Verified]
More >> -
- Stainless Steel Stamping Parts
- Stainless steel stamping partsZTHS060.01mm~0.1mm
Zhejiang ZN Technology Co., Ltd. [Verified]
More >> -
- Oil Gear Pump
- ● No oil tank and other accessory parts;● Equipped with overflow valve to prevent the lubrication pump set from overload;● Can be installed vertically or horizontally, but the oil height should not exceed the installation surface;● The suction pipe can be
Nanjing Sunrise Technology Co., Ltd. [Verified]
More >> -
- Brown Fused Alumina
- This Brown Fused Alumina is mainly used as recyclable abrasive in the blast cabinet and blasting chamber. Due to its low iron content, it is commonly used in blasting operations because blasting operations do not allow for iron contamination on non-ferrou
Henan Hengxin Industrial & Mineral Products Co.,Ltd [Verified]
More >> -
- HNBR Rubber O-ring
- O-rings are one of the most common seals used in machine design because they are inexpensive, easy to make, reliable and have simple mounting requirements
Xiamen Xiashun Seal Ind and Trade Co.,Ltd [Verified]
More >> -
- TD4A Tabletop Low Speed Centrifuges
- TD4A Tabletop Low Speed Centrifuge is widely used in the field Of clinical medicine, biochemistry, genetic engineering, immunology, etc. It is popular with clinic and reacher lab.
Shanghai Lu Xiangyi Centrifuge Instrument Co., Ltd. [Verified]
More >> -
- Bushing Metal Bearing
- Bushing metal bearing are used where the bearing is working without lubricant or with marginal lubricant during operation.They are designed from either cast iron or bronze-based metal to withstand high load.
Jiaxing Zhixin Precise Components and Parts Manufacturing Co.,Ltd [Verified]
More >> -
- Non Woven Roll Cutting Machine
- It is suitable for cutting different size papers, such as Hamburg Paper, A4 Paper, Regular Papers, Glass Paper, Plastic Film (PVC, BOPP, PET, CPP). Adopts programmed control system, all the parameters can be displayed on the control monitor, and the machi
Ruian Shengxiang Packaging Machine Co., Ltd [Verified]
More >>